SMD2835 LED Strip 19.2W/m 240 LEDs/m 24V | Set 5m

5m LED strip set with 240 LEDs/m for high light output

Need more than accent lighting? This 5m SMD2835 LED strip set provides approximately 1,920 lumens per metre, for areas where the strip makes a real contribution to general lighting. Its 240 LEDs per metre produce a dense light pattern, suitable for workspaces, shop windows and high ceiling coves. The included 145 W 24 V power supply must be permanently wired to 230 V; the set has no plug.

Key features

• Approximately 1,920 lumens per metre: four times the light output of the 60 LEDs/m version.
• 240 SMD2835 LEDs per metre provide a densely spaced light pattern.
• 19.2 W/m: approximately 96 W over 5 m.
• CRI >80 for rendering the colours of illuminated objects.
• Cuttable every 2.5 cm to suit the installation length.
• IP20: designed for dry indoor areas.
• 2-year warranty on the complete set.

What is included in the set?

• 1x 5m SMD2835 LED strip, 24 V, 19.2 W/m, 240 LEDs/m, IP20, with connection wires at both ends.
• 1x 24 V 145 W LED strip power supply with screw terminals for fixed wiring, with ample capacity for the strip’s 96 W load.

Focused lighting for workspaces, shop windows and coves

Above a workstation, the strip delivers substantial light along a continuous run. In a shop window, the high output helps illuminate products; in a high ceiling cove, the light can reflect into the room via the ceiling or wall. Choose the colour temperature to suit: 2400K Extra warm for a warm atmosphere, 3000K Warm white for welcoming displays, and 4000K Neutral white for a more neutral look during work.

60, 120 or 240 LEDs per metre: what changes?

The SMD2835 set with 60 LEDs/m (4.8 W/m, approximately 480 lm/m) is intended for modest ambient lighting. With 120 LEDs/m (9.6 W/m, approximately 960 lm/m), you get more light over the same length. Choose this 240 LEDs/m version (19.2 W/m, approximately 1,920 lm/m) when light output matters most. The 60 and 120 LEDs/m sets are Plug & Play; this higher-output model uses a permanently wired power supply.

Connecting the fixed-wiring supply and cutting the strip

Connect the 230 V side of the power supply permanently via its screw terminals; consult an installer if you are unsure. On the 24 V side, insert the strip’s wires directly into the supply terminals without soldering. The strip is 10 mm wide; if making a new connection after cutting, a separately available 10 mm connector is required.

Adjusting light intensity

For adjustable task lighting, fit the separately available WiFi LED Strip controller (up to 15.5 A) between the 24 V supply and strip, and operate it by app, Alexa or Google Assistant. A standard 230 V wall dimmer is not suitable.