LED Strip SMD2835 120 LEDs/m IP65 | 5 meters

At a glance

• IP65 For outdoor or damp areas
• Easy cut or extend
• Extension: 12V max. 10m - 24V max. 20m
• High colour rendering - CRI>90
• Low energy consumption - 9.6W per m
• Light output: 960 lm per m
• 120 LED chips per m
• Dimensions: 5000 x 8 x 2.3 mm
• Strong 3M adhesive backing for easy mounting
• Average lifetime of 13.5 years (10 hours per day)
• 3-year warranty

High quality

This SMD2835 LED strip is made from flexible, quality plastic. The 3M adhesive backing makes it easy to mount. Its standard 5-metre length can be adapted by cutting the strip or joining several strips. This The LED strip has IP65 protection, meaning it resists water and moisture. It can be installed in damp areas or outdoors at temperatures from -25°C to 60°C. The strip can be used for decorative or main lighting.

Water-resistant LED strip

This LED strip has an IP65 rating. It is water-resistant dustproof and can therefore be installed in damp areas.

Read more about IP ratings and protection for lighting

Extending or shortening an LED strip

This LED strip is easy to cut or extend. Both 12V and 24V versions can be cut every 3 LEDs (5 cm). Cut through the centre of the copper pads marked + and -. The ends can be clipped into connectors or closed with a cap.

The following connectors are available for shaping the strip as required.

• Straight connector
• 90° corner connector
• T-connector

For connecting the strip, the following connectors are available.

• DC connector
• End piece with short 2-pin wire

Choosing the right power supply

A power adapter is needed to connect this strip. It operates on 12V and requires a suitable adapter to convert the voltage. The correct adapter allows the intended performance and prevents insufficient power.

The adapter wattage must be higher than the strip wattage. Example: 5 metres = 48W, so a power adapter rated at least 48W is needed.

12V LED strip

• 1m-5m: Power adapter IP67 12V 60W
• 5m-10m: Power adapter IP67 12V 100W

24V LED strip

• 1m-5m: Power adapter IP67 24V 100W
• 5m-10m: Power adapter IP67 24V 100W
• 10m-15m: Power adapter IP67 24V 150W
• 15m-20m: Power adapter IP67 24V 200W

LED strip applications

This strip suits professional and domestic use, including offices, shops, cafés, restaurants, public transport, living rooms, bedrooms and bathrooms.

Other examples include lighting along stair treads, in cupboards or under a sofa or bed. Cafés often use LED strips to illuminate bars, while ceiling coves are another frequent application.

Light colour

Choose the colour temperature according to the purpose of the lighting. The usual uses for each colour are described below.

• 2400K has a soft orange glow, like candlelight or a late sunset. Suitable for a warm, homely and restful atmosphere in living rooms, cafés, restaurants and other spaces that do not need bright light.
• 3000K has a slightly yellow-orange glow and is brighter than 2700K while remaining warm. Suitable for comfortable lighting in living rooms, waiting areas, cafés, restaurants, corridors and general spaces.
• 4000K has a white-yellow tone. Suitable where visibility, concentration and comfort matter, including offices, classrooms, kitchens, corridors, shops, changing rooms, hairdressers, stairwells and waiting areas.
• 6000K has a white to pale-blue tone. Suitable for bright spaces requiring good visibility and concentration, such as hospitals, laboratories, workshops, studios and garages.