COB LED Strip 10W/m Cut Anywhere 24V | Plug & Play Set 5m

5-metre cut-anywhere COB LED strip set for an exact fit

A light line just a few centimetres too long will not fit neatly inside furniture or an alcove. This 5-metre cut-anywhere COB LED strip set lets you trim at any point, without fixed cutting intervals. You can then connect the strip to a socket using the included clip connector and 24 V adapter, with no soldering or tools needed.

Key features

• Cut anywhere for precise lengths in bespoke installations.
• 10 W/m, approx. 50 W total and around 750-800 lumens per metre.
• 240 COB LEDs per metre for a continuous line of light.
• 8 mm wide and 2 mm high for narrow fitting spaces.
• 120° beam angle and CRI >90, or CRI >80 at 2700K.
• IP20 for dry indoor areas.
• 2-year warranty on the complete set.

What's included in the set?

• 1x 5-metre cut-anywhere COB LED strip, 24 V, 10 W/m, IP20, 8 mm wide.
• 1x 24 V 72 W EU power adapter with DC plug.
• 1x 8 mm COB DC clip connector to connect the strip to the adapter.

Neat made-to-measure lines for furniture and alcoves

In a furniture recess, you can keep the light exactly within the available width. Along a skirting board, the line fits the wall length, while beneath a bespoke shelf you avoid any overhanging section. Install using the adhesive tape on the back. The strip is suitable for dry indoor areas only.

When should you choose cut-anywhere over the standard 10 W/m set?

The standard version can be cut every 5 cm. If those intervals fit your project, it provides around 1,000 lumens per metre. If you need an unusual, exact length, this version is designed for that purpose. Light output is approximately 750-800 lumens per metre.

Choose the colour temperature for your project

• 2700K Warm: warm accents in a living room or bedroom.
• 3000K Warm white: inviting light beneath a shelf or inside furniture.
• 4000K Neutral white: neutral lighting at a work or storage area.
• 5000K Daylight white: fresh white light in a workspace.
• 6000K Cool white: cool white light in a garage or workshop.

24 V power supply and dimming options

The 72 W adapter powers up to 5 metres of strip from a single feed point. Sets of 10 and 15 metres are also available for longer runs. For dimming, fit a separately sold single-colour controller between the adapter and strip, such as the Mi-Light single-colour LED strip controller (12-24 V) with remote control or the WiFi LED Strip controller for app and voice operation. A standard 230 V wall dimmer will not work.