MeanWell LED Strip Driver IP20 12V | 100W

MeanWell 12V 100W IP20 LED driver for indoor LED strips

Use this MeanWell 100W 12V LED driver for LED strips and modules in dry indoor areas. The supply provides 12V DC with a maximum output current of 8,500mA.

A practical maximum load of 80W is recommended. This leaves a margin for long-term operation and heat generation.

Key features of this 12V LED driver

• 100W rated power recommended practical load up to 80W
• 12V DC output for 12V LED strips and modules
• 8.5A output current for medium-sized 12V installations
• IP20 version for dry indoor areas
• Non-dimmable provides a constant output voltage
• 3-year warranty

Where to use this MeanWell 12V driver

This supply is used for 12V LED strips, LED modules and other indoor constant-voltage applications.

The IP20 version is not intended for damp locations or outdoor use.

Practical load up to 80W

Allowing headroom matters in LED installations. This supply is intended for a maximum practical load of 80W.

This prevents it from operating continuously at the limit of its rated power.

Installation and connection

Connect the power supply to a suitable mains installation and the 12V DC output to compatible LED lighting. Leave ventilation space around the open IP20 housing.

The supply is not dimmable. Installation must be carried out by a qualified technician.

Why choose this 12V driver?

This is a compact 12V IP20 driver for indoor installations using LED strips or LED modules.