COB LED Strip 10W/m Cut Anywhere 24V | Plug & Play Set 10m

10-metre cut-anywhere COB LED strip set with plug

When lighting around stairs, alcoves or bespoke furniture, fixed cutting intervals can leave you just short or too long. You can cut this 10-metre COB LED strip to the exact length required, without having to find a marked cutting point. The 24 V adapter has an EU plug, so the complete set is ready to connect once the clip connector is attached.

Key features

• LED technology: COB, 240 LEDs per metre.
• Power: 10 W/m; approx. 100 W across 10 metres, supplied by a 150 W adapter.
• Light output: approx. 750-800 lumens per metre.
• Colour rendering: CRI >90 (2700K: CRI >80).
• Cutting: cut anywhere to your preferred length.
• Strip dimensions: 8 mm wide and 2 mm high; IP20 for dry indoor areas.
• Warranty: 2 years on the complete set.

What's included in the set?

• 2x cut-anywhere COB LED strips, 10 W/m, each 5 metres long, 24 V, 8 mm wide, IP20
• 1x 24 V 150 W power adapter with EU plug and DC connector
• 1x 8 mm COB DC clip connector
• 1x 8 mm COB strip-to-strip connector

Plug in without soldering

Clip the DC connector onto the first strip and connect the adapter's DC plug. Join the second strip using the supplied strip-to-strip connector, then plug the EU plug into a socket. No soldering is required.

Made-to-measure lighting for furniture and alcoves

Finish a bookcase with shelves of different widths, follow the edge of a long hallway recess or add a clean line of light along a built-in desk. The strip is intended for dry indoor spaces.

When should you choose cut-anywhere instead of standard COB?

Choose this version when individual centimetres or millimetres matter, such as for bespoke cabinetry. The standard 10 W/m Advanced set can be cut every 5 cm and delivers approximately 1,000 lumens per metre, slightly more than this version's 750-800 lumens per metre.

Which white colour temperature suits your project?

• 2700K Warm white: a warm border beside a seating area.
• 3000K Warm white: welcoming light above a desk.
• 4000K Neutral white: practical lighting along a display wall.
• 5000K Daylight white: clear white light for an extended work area.
• 6000K Cool white: cool white light along a technical workbench.

Dimming after cutting to length

Once the strip is cut to size, adjust its brightness with a Mi-Light single-colour LED strip controller and Mi-Light 4-zone remote control, fitted between the adapter and the strip. This set does not work with a standard 230 V wall dimmer.